(775) 317-4488|Need help with your map? Call or chat with us!support@oshamap.com

Are Evacuation Maps Required by OSHA?

Direct answer: Federal OSHA does not universally require every workplace to post an evacuation map. OSHA does regulate exit routes, and 29 CFR 1910.38 governs an Emergency Action Plan when another OSHA standard requires one. A posted map can help communicate routes, while state plans, adopted fire or building codes, licensing rules, or an AHJ may impose separate diagram requirements.

Related: written EAP requirements, map display guidance, practical map checklist, and egress map generator.

Last reviewed: August 20, 2026 ยท Reviewed by OSHAMap Safety Editorial Team ยท Review with a qualified safety professional when required.

Need a site-specific evacuation map draft?

Upload your floor plan, sketch, PDF, or image. OSHAMap drafts exits, routes, a You Are Here marker, and an assembly point for review by a qualified safety professional or your AHJ.

Book Free Map Review

Trusted by offices, warehouses, clinics, schools, hotels & manufacturing sites.

Does OSHA require a posted evacuation map?

OSHA evacuation map requirement

Federal OSHA does not have one rule that universally requires a posted evacuation map. OSHA regulates exit routes, and 29 CFR 1910.38 governs an Emergency Action Plan when another OSHA standard requires one. A map can support route communication, but it does not replace the applicable plan, training, alarms, or maintained exit routes.

Federal map mandate
No universal posted-map rule
EAP applicability
Triggered by another OSHA standard
10-employee rule
Written versus oral plan format
Other possible requirements
State plan, adopted code, AHJ, licensing, lease, or insurer

What the 10-employee rule actually means

Section 1910.38(a) says the EAP requirement applies when another OSHA standard requires a plan. Section 1910.38(b) then addresses the plan's format: an employer with 10 or fewer employees may communicate an otherwise-required plan orally. An employer with more than 10 employees must keep that otherwise-required plan in writing and make it available for employee review. Headcount is therefore a written-versus-oral threshold, not a universal EAP trigger.

What an OSHA EAP must cover when it applies

  1. Procedures for reporting a fire or other emergency.
  2. Emergency evacuation procedures, including the type of evacuation and exit-route assignments.
  3. Procedures for employees who remain to operate critical plant functions before evacuating.
  4. Procedures to account for employees after evacuation.
  5. Rescue or medical duties for employees assigned to perform them.
  6. The name or job title of contacts who can explain the plan or employee duties.
  7. An employee alarm system that meets the applicable OSHA requirements.

A map may help explain routes and assembly locations, but it cannot satisfy these plan elements by itself. See the written EAP guide for the document-level checklist.

When another rule may require a posted diagram

Requirements can come from an OSHA-approved State Plan, a locally adopted fire or building code, an occupancy or licensing rule, an insurer, a landlord, or a facility-specific policy. Those rules vary by jurisdiction and occupancy. Ask the local fire marshal or other authority having jurisdiction which code edition is adopted, whether a diagram is required, how many copies must be posted, and what each copy must show.

If you post a map, make it operationally useful

  • Match the current walls, doors, stairs, and maintained exit routes.
  • Give every posted copy a location-specific You Are Here marker.
  • Show available routes without directing occupants through locked, blocked, or unsuitable paths.
  • Include site-relevant assembly and emergency-equipment information where appropriate.
  • Use a legible legend and identify the building, floor, and revision date.
  • Review the final draft with a qualified safety professional or the AHJ before posting.

Frequently asked questions

Are evacuation maps legally required by federal OSHA?

Not for every workplace. Federal OSHA does not have one rule that universally requires a posted evacuation map. OSHA regulates exit routes, and 29 CFR 1910.38 governs an Emergency Action Plan when another OSHA standard requires one. State plans, adopted fire or building codes, licensing rules, an AHJ, a lease, or an insurer may separately require a posted diagram.

When does OSHA require an Emergency Action Plan?

29 CFR 1910.38(a) applies when another OSHA standard requires an Emergency Action Plan. The triggering standard depends on the workplace and its hazards. The 10-employee language in 1910.38(b) does not create the EAP duty; it determines whether an otherwise-required plan must be written or may be communicated orally.

Does a posted map satisfy an OSHA Emergency Action Plan?

No. A map can communicate evacuation routes and support training, but it does not replace the plan elements in 1910.38, employee review and training, alarm procedures, accountability procedures, or the duty to maintain safe exit routes.

What should I check before posting an evacuation map?

Confirm that the diagram matches the current layout and maintained exit routes, orient each copy to its posting location, and verify the symbols, mounting, accessibility, and posting rules required by the codes adopted in your jurisdiction. A qualified safety professional or the local authority having jurisdiction should review the final map.

Can a digital evacuation map replace a paper map?

That depends on the rule that applies to your facility. A digital map can support training and access, but a local code or facility rule may require a conspicuously posted physical diagram that remains usable without power or a personal device. Confirm the accepted format with your AHJ.

๐Ÿ“Š 5 Free Maps Left

Create Your Evacuation Map

See the safety plan from every angleWatch a sketch become a polished map, then step inside.Watch demo Need to start from a rough layout?Sketch rooms and exits, then turn it into a clear safety map.Draw your map
โœ๏ธ
High ContrastUse dark ink on white paper. Bold lines help our AI detect walls accurately
๐Ÿ“
Top-Down AnglePhotograph from directly above โ€” tilted angles distort the geometry
๐Ÿท๏ธ
Label RoomsWrite "Exit", "Storage", "Breakroom" etc. โ€” our AI reads your labels for compliance
๐Ÿ”
Full Floor PlanCapture the entire layout including all walls, doors, and exits โ€” no cropping
๐Ÿšช
Mark ExitsCircle or label exit doors with a red dot or "EXIT" text for best detection
๐Ÿ’ก
Good LightingAvoid shadows and glare โ€” even lighting produces the sharpest results
๐Ÿ“

Drag & drop your floor plan here

or

PNG, JPG, HEIC, TIFF, BMP, SVG, AVIF, WebP, PDF, DOC, DOCX, PPT, PPTX, XLS, XLSX, ODT, ODP, ODS, DXF, DWG - Hand-drawn sketches work too!

or

No floor plan handy? Try the included floor plan with real AI generation โ€” no upload needed. This may take a minute or longer.

Edit your map for free.
Move, resize, and recolor every exit sign, route, and icon.
Create a free account to save and download in HD. No credit card required.
FREE
๐Ÿ”’Your files are private: never shared, stored temporarily, deleted automatically.

Compliance Options

๐Ÿ”ฅ NEWโœจ

Customize Your Map

Add special requests for your safety map - tell our AI exactly what you need!

  • ๐ŸŽฏAdd specific details like "Mark fire extinguisher near kitchen"
  • ๐Ÿ“Request specific zones: "Highlight assembly point in parking lot"
  • ๐ŸฅAdd safety equipment: "Include AED location near reception"
0/2000

Quick Add:

Automatic (recommended)

Redraw the architecture from your floor plan first, then add editable safety markings. The original upload remains a reference, not the map background.

Frequently Asked Questions

Is this evacuation map generator really free?

Yes โ€” you can generate your first OSHA-aligned evacuation map draft completely free. Just upload a floor plan and our AI drafts a professional map in about 30 seconds. No credit card required.

Are the generated maps aligned with OSHA?

Our AI drafts maps that follow OSHA 29 CFR 1910.36โ€“37 and NFPA 101 Life Safety Code standards. Every map includes clearly marked exits, fire extinguisher locations, assembly points, and directional evacuation arrows. Supervisor review is required before posting to your facility.

What file formats can I upload?

We accept PNG, JPG, GIF, WebP, BMP, TIFF, AVIF, HEIC, SVG, PDF, DOC/DOCX, PPT/PPTX, XLS/XLSX, ODT, ODP, ODS, DXF, and DWG floor plans. Office and CAD files are converted securely before processing; PDF uploads let you choose the source page.

How long does map generation take?

Most maps are generated in 20โ€“40 seconds. Complex multi-floor plans may take slightly longer. You see the preview instantly โ€” create a free account (no credit card) to download the file.

Can I edit the map after generation?

Yes โ€” every generated map opens in a free drag-and-drop editor where you can move, resize, and recolor exit signs, routes, and equipment icons. Enterprise features like multi-floor support and branded maps are available on paid plans.

Is my floor plan data secure?

Yes. All uploads are encrypted in transit (TLS 1.3) and processed in secure cloud environments. We do not share your floor plans with third parties.