(775) 317-4488|Need help with your map? Call or chat with us!support@oshamap.comPartners & Joint Ventures
🎬

Film Set OSHA Compliance & Emergency Evacuation Maps

Keep Cast & Crew Safe on Every Production

Generate OSHA-aligned evacuation maps for soundstages, on-location shoots, and temporary set structures. Meet federal 29 CFR 1910.38 and Cal/OSHA requirements in under 2 minutes.

Free instant preview • No credit card required

Film Production Safety Compliance Generator

Upload your set diagram or soundstage floor plan and get a professional OSHA-aligned evacuation map in under 2 minutes

📊 5 Free Maps Left

Create Your Film Production Evacuation Map

See the safety plan from every angleWatch a sketch become a polished map, then step inside.Watch demo Need to start from a rough layout?Sketch rooms and exits, then turn it into a clear safety map.Draw your map
✏️
High ContrastUse dark ink on white paper. Bold lines help our AI detect walls accurately
📐
Top-Down AnglePhotograph from directly above — tilted angles distort the geometry
🏷️
Label RoomsWrite "Exit", "Storage", "Breakroom" etc. — our AI reads your labels for compliance
🔍
Full Floor PlanCapture the entire layout including all walls, doors, and exits — no cropping
🚪
Mark ExitsCircle or label exit doors with a red dot or "EXIT" text for best detection
💡
Good LightingAvoid shadows and glare — even lighting produces the sharpest results
📁

Drag & drop your floor plan here

or

PNG, JPG, HEIC, TIFF, BMP, SVG, AVIF, WebP, PDF, DOC, DOCX, PPT, PPTX, XLS, XLSX, ODT, ODP, ODS, DXF, DWG - Hand-drawn sketches work too!

or

No floor plan handy? Try the included floor plan with real AI generation — no upload needed. This may take a minute or longer.

Edit your map for free.
Move, resize, and recolor every exit sign, route, and icon.
Create a free account to save and download in HD. No credit card required.
FREE
🔒Your files are private: never shared, stored temporarily, deleted automatically.

Compliance Options

🔥 NEW✨

Customize Your Map

Add special requests for your safety map - tell our AI exactly what you need!

  • 🎯Add specific details like "Mark fire extinguisher near kitchen"
  • 📍Request specific zones: "Highlight assembly point in parking lot"
  • 🏥Add safety equipment: "Include AED location near reception"
0/2000

Quick Add:

Automatic (recommended)

Redraw the architecture from your floor plan first, then add editable safety markings. The original upload remains a reference, not the map background.

Frequently Asked Questions

Is this evacuation map generator really free?

Yes — you can generate your first OSHA-aligned evacuation map draft completely free. Just upload a floor plan and our AI drafts a professional map in about 30 seconds. No credit card required.

Are the generated maps aligned with OSHA?

Our AI drafts maps that follow OSHA 29 CFR 1910.36–37 and NFPA 101 Life Safety Code standards. Every map includes clearly marked exits, fire extinguisher locations, assembly points, and directional evacuation arrows. Supervisor review is required before posting to your facility.

What file formats can I upload?

We accept PNG, JPG, GIF, WebP, BMP, TIFF, AVIF, HEIC, SVG, PDF, DOC/DOCX, PPT/PPTX, XLS/XLSX, ODT, ODP, ODS, DXF, and DWG floor plans. Office and CAD files are converted securely before processing; PDF uploads let you choose the source page.

How long does map generation take?

Most maps are generated in 20–40 seconds. Complex multi-floor plans may take slightly longer. You see the preview instantly — create a free account (no credit card) to download the file.

Can I edit the map after generation?

Yes — every generated map opens in a free drag-and-drop editor where you can move, resize, and recolor exit signs, routes, and equipment icons. Enterprise features like multi-floor support and branded maps are available on paid plans.

Is my floor plan data secure?

Yes. All uploads are encrypted in transit (TLS 1.3) and processed in secure cloud environments. We do not share your floor plans with third parties.

On-Set Hazards Unique to Film Production

Entertainment productions face safety challenges unlike any other industry. Understanding these hazards is critical for OSHA entertainment industry compliance.

🔥

Pyrotechnics & Special Effects

Explosive charges, fire effects, and atmospheric smoke require blast radius clearance zones and fire watch personnel on every take.

🎭

Stunt Coordination

High-risk falls, fire gags, and vehicle sequences demand pre-planned evacuation routes with EMT on-site and dedicated safety zones.

⚡

High-Amperage Electrical

Film lighting draws massive power loads. Cable runs and distro boxes create tripping hazards and fire ignition sources.

🏗️

Temporary Structures

Set construction, scaffolding, and rigging require structural integrity assessments and clear egress paths between set pieces.

🔦

Hot Lighting Equipment

HMI and tungsten fixtures reach extreme temperatures, creating burn hazards and potential fire ignition near flammable set materials.

👥

Crowd Extras Management

Large groups of background actors require evacuation briefings and multiple egress routes to prevent crowd crush scenarios.

Temporary Structure Egress Requirements

Film sets built inside soundstages and on-location must meet specific OSHA egress standards. See our complete egress map guide for detailed requirements.

1

Minimum 4-Foot Clear Aisles

All pathways between set pieces, equipment, and craft services must maintain unobstructed 4-foot minimum width for emergency egress.

2

Outward-Opening Exits

Per OSHA 29 CFR 1910.36, all exit doors must swing outward in the direction of travel. Stage doors and loading dock exits included.

3

Emergency Lighting

Soundstages require battery-backup emergency lighting that activates within 10 seconds of power failure. Exit signs must be illuminated.

4

Multiple Exits for 50+ Occupancy

Sets with more than 50 cast and crew require minimum two exits on opposite sides. Larger productions need additional exits per fire code.

5

Fire Extinguisher Placement

Class ABC extinguishers required every 75 feet of travel distance. Additional CO2 extinguishers near electrical distribution areas.

6

Posted Evacuation Maps

Maps must be posted at eye level (60-66 inches) at all entrances, near exits, and at crew holding areas. Include assembly point locations.

Location Permitting Safety Checklist

Before filming at any location, production safety coordinators must verify these requirements. Major hubs like Los Angeles, Atlanta, and New York have specific permitting processes.

✓

Location Scout Safety Assessment

Document all egress routes, identify nearest hospitals and fire stations, note terrain hazards

✓

Fire Department Coordination

Submit evacuation plans for approval, schedule on-site fire safety officer if required by permit

✓

Emergency Access Routes

Maintain clear vehicle access for fire trucks and ambulances at all times during production

✓

Temporary Assembly Points

Establish visible gathering locations minimum 50 feet from structures, brief all crew on day 1

✓

Communication Plan

Designate safety coordinator with radio channel, establish evacuation signal (3 air horn blasts typical)

✓

Weather Contingency

Lightning protocol for outdoor shoots, wind limits for rigging, heat illness prevention plan

For California productions, reference Cal/OSHA Division of Occupational Safety and Health requirements. Union productions must also follow IATSE safety standards.

Stunt and Pyrotechnic Safety Zones

High-risk sequences require carefully planned safety perimeters and evacuation protocols.

💥

Pyrotechnic Safety Zones

  • Blast radius calculation based on charge size (typically 50-100ft minimum)
  • Fire watch personnel positioned with extinguishers during all hot work
  • Crew cleared from zone before any pyrotechnic sequence
  • EMT and first aid station within 100 feet of effects area
  • Pre-planned evacuation routes accounting for smoke and debris drift
  • Fire department on standby for major pyrotechnic sequences
🏃

Stunt Safety Zones

  • Rehearsal and safety meeting before every stunt sequence
  • Dedicated stunt coordinator with radio communication to all departments
  • Fall pads, air bags, or wire rigging safety-checked before each take
  • Vehicle stunts require full track closure and fire suppression on standby
  • Medical team briefed on potential injuries specific to the stunt
  • Secondary egress route if primary becomes blocked during sequence

Case Study: Major Studio Achieves Zero Incidents

23Soundstages Mapped
0Safety Incidents
4hrsSetup Time Saved

A major Atlanta-based production studio needed to update evacuation maps across all 23 soundstages to meet new insurance requirements. Previously, creating maps manually took 2-3 days per stage.

Using our AI-powered generator, the safety team uploaded floor plans and generated compliant evacuation maps for each stage in under 10 minutes. The maps included accurate fire extinguisher placement, clearly marked exits, and assembly point locations specific to each soundstage layout.

Result: The studio passed their insurance safety audit with zero findings and established a protocol for updating maps within 24 hours of any set rebuild.

Request a Location Safety Audit

Get a comprehensive safety assessment for your upcoming production. Our team reviews your location scouts, identifies egress requirements, and generates compliant evacuation maps for every shooting location.

Try the Free Generator

Film Production OSHA Compliance FAQ

Frequently Asked Questions

What OSHA regulations apply to film set safety?
Film productions must comply with OSHA 29 CFR 1910.38 (Emergency Action Plans), 29 CFR 1926 (Construction Standards for temporary sets), and Cal/OSHA Title 8 for California productions. All sets require written emergency action plans with documented evacuation procedures, fire extinguisher placement every 75 feet, and clearly marked exit routes.
Do I need separate evacuation plans for different shooting locations?
Yes, each filming location requires its own evacuation plan. Studio soundstages have permanent exits and fire systems, while on-location shoots need portable safety equipment and temporary assembly points. Location scouts should identify evacuation routes and coordinate with local emergency services before filming begins.
What are the egress requirements for temporary film set structures?
Temporary structures on film sets must maintain minimum 4-foot clear aisles, have exits that open outward, include emergency lighting, and post evacuation maps at eye level. Per OSHA 29 CFR 1910.36, exit routes must be free of obstructions and lead directly to an open space. Sets with over 50 people require multiple exits.
How do I create safety zones for pyrotechnics and stunts?
Pyrotechnic safety zones require blast radius calculations based on charge size, typically 50-100 feet minimum clearance. Stunt zones need EMT on-site, fire watch personnel, and pre-planned evacuation routes that account for smoke and debris. All crew must be briefed on safety zones and evacuation signals before each take.
What permits are required for film production safety?
Major production hubs require fire department permits for pyrotechnics, local filming permits with safety plans, and IATSE compliance documentation. California productions need Cal/OSHA IIPP (Injury and Illness Prevention Program). Location permits typically require evacuation plan submission for approval.
How often should film set evacuation plans be updated?
Evacuation plans should be updated whenever the set layout changes, new hazards are introduced, or filming moves to a new location. Best practice is daily safety briefings that include evacuation route reminders. Major set rebuilds require new evacuation map generation within 24 hours.
What are common OSHA violations on film sets?
Common violations include blocked exits from equipment storage, missing fire extinguishers near electrical setups, no documented evacuation procedures for location shoots, insufficient emergency lighting, and failure to brief cast and crew on evacuation routes. These can result in citations up to $16,550 per violation.
🔓 Free Account Bonus

Unlock 5 Free Floor-Plan Uploads Per Month

Create your free account to access professional, OSHA-aligned evacuation-map drafts for review.

What You Get When You Register:

  • ✓ 5 Free Floor-Plan Uploads Per Month + Up to 5 Regenerations Per Upload - Professional maps ready for printing
  • ✓ No Watermarks - Clean, presentation-ready evacuation maps
  • ✓ Personal Dashboard - Manage all your maps in one place
  • ✓ Save & Revisit Anytime - Access your maps from any device
  • ✓ OSHA-Aligned - Meets 29 CFR 1910.38 requirements
15,000+Maps Generated
100%Compliant
Sample Output
Sample Film Production OSHA-aligned evacuation floor plan showing emergency exits, fire extinguisher locations, and assembly points
🧯 Fire Extinguishers🚪 Exit Routes📍 You Are Here

No credit card required • Free account • Access your map drafts for review